Research past projects for existing control and field verify. Place, tie, office adjust and field calibrate.

Deliverable: Pink SCR Cap on 30” #5 Rebar (encased when necessary), Project Field Schedule with GRS80, WA NAD 83/11 – 12a (Grid) & WSDOT Project coordinates and Geographic Coordinate System (GCS).

Research, field exploration and verification of all Monumentation.

Deliverable: Backup data and findings. Electronically recreated and field verify. Protect, Reference or remove. Apply for all permitting.InRoads: DTM, ALG( when applicable)

MicroStation: DGN (features, notes & control)

Revised Survey Monument Removal Permit Forms

Research the legal right, established by usage or grant, to pass along a specific route through grounds or property belonging to another. Deliverable: Backup data and findings. Electronically recreated, field verify and lay out right of way (existing or proposed).

InRoads: DTM, ALG( when applicable)

MicroStation: DGN (features, notes & control)

Researching and verify the project corridor Horizontal and Vertical alignment.

Deliverable: Backup data and findings. Electronically recreated, field verify and laying out right of way (existing or proposed).

InRoads: DTM, ALG( when applicable)

MicroStation: DGN (features, notes & control)

Research, field exploration and verification of all corners showing the extent, value, and ownership of land adjacent to WSDOT R/W.

Deliverable: Backup data and findings. Others upon request.

Research past projects for existing topo, field verify and collect new features as requested.

Deliverable: Backup data and findings.

InRoads: DTM, ALG( when applicable)

MicroStation: DGN (features, notes & control)

Research past projects for existing stock pile or pit topo data, field verify and collect new features as requested.

Deliverable: Backup data and findings. Volumes upon request

InRoads: DTM, ALG(when applicable)

MicroStation: DGN (features, notes & control)

Research past projects for existing Hydraulic topo data, field verify and collect new features as requested.

Research past projects for existing Utility topo data, field verify and collect new features as requested.

Setting out the existing, ultimate, detour or conceptual horizontal and/or vertical alignments.

Setting out design features or structures, such as, fire hydrants, curb and gutter, walls/planters, catch basins and area drains, bridge piers or footings, ect.

Setting out utilities such as sanitary sewer lines, storm drain lines, water lines, electrical lines etc.

Setting out limits removal of trees, vegetation, and debris in the areas of a site that are being developed.

Setting out a location which will determine the point at which the proposed slope intersects the existing ground.

Similar to a pre-design topo, the As-Built shows exactly what has been completed to date. This survey provides an important tool to manage the building as it is under construction and after it has been completed.

The purpose of this collection method is to determine the length, width and depth of a reach relative to the roadway surface. At the point at which the reach crosses under the roadway there will be a mechanism; a pipe, culvert or bridge used to convey habitat and water. The data provided will be used to make a determination as to how this mechanism may be changed (ie. altered or removed and replaced) to correct obstructions and return the conveyance to suitable standards.

• Significant trees
• Encroachments
• Thalweg
• Structures shall be collected with all appurtenances (ie. wing walls and abutments)
• Pipes and round culverts
• Box culverts
• Bridge
• Accessory Items
• Photos

The purpose of this collection method is to determine the length, width and depth of a reach relative to the roadway surface. At the point at which the reach crosses under the roadway there will be a mechanism; a pipe, culvert or bridge used to convey habitat and water. The data provided will be used to make a determination as to how this mechanism may be changed (ie. altered or removed and replaced) to correct obstructions and return the conveyance to suitable standards.

• Significant trees
• Encroachments
• Thalweg
• Structures shall be collected with all appurtenances (ie. wing walls and abutments)
• Pipes and round culverts
• Box culverts
• Bridge
• Accessory Items
• Photos

Place ground targets, collect aerial still images and develop an orthomosaic with digital surface. Deliverable: TIF, PTS. InRoads: DTM, DGN

Still and/or video footage collected in Nadir or Oblique view. Deliverable: JPG and MOV

Collect Bore hole or Piezometer locations. Deliverable: X,Y,Z in State Plane and WSDOT Project Datum. InRoads: FWD, ALG, XLS